- 14 ppi (Pitch per Inch)
- Recommended Filing - Hybrid
- Plate Thickness .018"
- Kerf of .027"
- Depth of cut 2 1/16"
Perfect for building furniture, cabinets, and general joinery. Great for cutting tenons, dados, and long sliding dovetails.
Plate: We wanted to make a lean, shallow-backed carcase saw with a 14" toothline for furniture-grade cuts with long-rifle precision, while retaining the robust nature and crisp action for which our saws are known. The .015 plate was too delicate for the kind of comprehensive joinery tasks we had in mind, particularly when making sliding dovetails and dadoes-kink it once through inelegant technique or when encountering some tough stock, and it's toast, just a one-generation tool. And-the .015 plate has practically no heat sink--anything more than a 4/4" cut spanning 3 inches will S-roll the toothline as cut friction heats up the metal.
Then we looked at the .018 plate and got fantastic results by lessening the amount of real estate below the back to enhance rigidity and extending the classic carcase saw's 12" toothline up to 14". The longer, shallower .018 plate spreads the heat generated by cut friction far more efficiently, while remaining significantly tougher than the .015 plate, and, with fewer, more accurate strokes compared to the action of a .02 plate.
The result? No S-roll generated by cut friction. No tapping your foot, waiting to complete the cut. Instead, Bad Axe has produced a rigid, thin, shallow-backed saw fully capable of slicing down 5/4" stock spanning 5" across, with an incredibly positive, deliberate action.
Filing: "What filing should I choose for my new go-to carcase saw?" It depends entirely on your personal woodworking style. While you can't go wrong with this saw in crosscut for making what would be the preponderance of cuts across the grain, I guarantee our Bayonet's performance is enhanced even more when filed in hybrid mode. Why? Think about those long sliding dovetail joints you'll want to make, or making a more robust dovetail altogether in 6/4, even 8/4 stock.. Look at it this way: no one's going to take you out back and beat you up if you decide to cut with the grain for whatever woodworking reason you can cook up. Hybrid-filing gives you a great, positive cut whether with or across the grain with absolutely no sacrifice on the clean finish along the end grain that Bad Axe saws are known for. So--taking off my sawmaker's hat and putting on my woodworker's hat--IMHO, all dedicated crosscut serves to do is slow down your cut. But I'm also a strong believer in doing what best works out for our customers' personal woodworking style as they see fit.
Folded Sawback: Delve into the craftsmanship behind our traditional folded sawbacks, a hallmark of excellence that sets Bad Axe's saws apart from the rest. Unlike milled static backs commonly found in mainstream offerings, our folded backs embody a heritage of meticulous artistry and functional superiority.
Crafted through time-honored techniques, our folded backs undergo a precise process, resulting in a seamless, robust construction. This method not only enhances the structural integrity of the saw but also allows for dynamic adjustments and retensioning of the toothline, crucial for maintaining optimal cutting performance over time.
In contrast, milled static backs lack the versatility and resilience of our traditional folded backs. Their uniformity limits the ability to adjust tension, rendering them prone to premature wear and diminishing cutting efficiency, especially under rigorous use.
Folded Sawback: Delve into the craftsmanship behind our traditional folded sawbacks, a hallmark of excellence that sets Bad Axe's saws apart from the rest. Unlike milled static backs commonly found in mainstream offerings, our folded backs embody a heritage of meticulous artistry and functional superiority.
Crafted through time-honored techniques, our folded backs undergo a precise process, resulting in a seamless, robust construction. This method not only enhances the structural integrity of the saw but also allows for dynamic adjustments and retensioning of the toothline, crucial for maintaining optimal cutting performance over time.
In contrast, milled static backs lack the versatility and resilience of our traditional folded backs. Their uniformity limits the ability to adjust tension, rendering them prone to premature wear and diminishing cutting efficiency, especially under rigorous use.
At Bad Axe, we stand by the enduring tradition of folded sawbacks for their unparalleled durability, versatility, and craftsmanship. Each saw embodies a legacy of excellence, meticulously crafted to deliver precision and reliability for generations to come. Experience the difference that traditional folded backs make in the world of woodworking – where precision meets heritage, and craftsmanship knows no compromise.
Handle: Inspired by the timeless design of the 1876 Disston-pattern open handle, each Bad Axe handle is meticulously crafted from full-heart quartersawn stock in a selection of premium hardwoods including Cherry, White Oak, Hard Maple, and Walnut.
Why choose quartersawn wood? Despite being the priciest option, quartersawn stock offers unparalleled stability, minimizing the effects of seasonal wood movement that can compromise the accuracy of the saw plate alignment. At Bad Axe, we prioritize the use of quartersawn wood to ensure the longevity and reliability of our handles. All handles are dipped in natural Watco Danish oil with the exception of Walnut, which is dipped in black walnut Watco, followed by Tripoli and finish buffed with carnuba wax.
Furthermore, we are committed to sustainability and environmental responsibility. All our handle stock is sourced from a trusted family-owned business known for their sustainable lumber harvesting practices. This partnership, established from the inception of Bad Axe, underscores our dedication to supporting North American hardwoods and promoting eco-conscious manufacturing processes.
