- 12 ppi (Pitch per Inch)
- Filed Hybrid
- Plate Thickness .025"
- Kerf of .0325"
- Depth of cut 4 5/8"
Plate & Filing: I file my miter saw's toothline at 12 ppi x-cut on a .025 plate, which, when combined with our method of hammer-setting and gently dressing the teeth, gives you a superbly finished cut. With up to 4.5" under the back and 20" in length, the Bad Axe miter saw offers up to 17" of cut throw, given that the Stanley No. 150 incorporates a metal sleeve to guide the cut rather than limiting the toothline to only 2/3rds of its capacity—as typically experienced with the elevator post guides germane to larger boxes.
Handle: Modeled after traditional 1887 Disston-pattern closed handle. All Bad Axe handles are milled from full-heart quartersawn stock in Cherry, White Oak, Hard Maple and Walnut. Why quartersawn? Though it's the most expensive cut of wood, quartersawn stock mitigates wood movement with seasonal change, which can throw the plate out of true.
Bad Axe sources all handle stock from a family-owned business practicing sustainable lumber harvesting practices, and with whom we've done business from the very beginning. North American hardwoods: beautiful, sustainable, environmentally responsible.
Backs: Traditional folded sawback finished in black-oxide carbon steel, or titanium nitride carbon steel. Read more about this critical component for any backsaw, and why Bad Axe promotes the enduring traditional folded sawback over commonplace static-backed saws that disallow retensioning the toothline with heavy use.
Have you purchased enough brass-backed saws already to know that they just don't age that well? It's a great look, but it doesn't take long for tarnish to set in, and over time a brass-backed saw deforms with hard use, wreaking havoc on your toothline. But it's traditional, right? And conveys a traditional, warm look we all like to see. But form only goes so far before substance sets in. You very seldom see brass-backed saws longer than 12" or 14", because brass just isn't a strong enough an alloy for larger saws. Steel on the other hand presents superior strength and durability. So-we at Bad Axe made the hard choice to phase brass out of our product line, since it's difficult to work with (it has a 'springy' quality to it), doesn't form well, tarnishes, and at the end of the day, just doesn't measure up to carbon steel, which can take a variety of plating’s for aesthetic purposes.
Long a favored finish for high-end firearms, titanium nitride presents stellar corrosion and wear-resistance, Titanium-Nitride hits the sweet spot when it comes to form following function. The tone falls between the look you get between brass and bronze, so it certainly scratches that aesthetic itch you desire. And the cool thing about it? We can apply Titanium Nitride on our largest sawbacks, where the strength and durability of a steel-backed saw is paramount. So, what are you getting for the $75 upcharge? It's obviously not cheap-because it's not a cheap plating process for us to apply. But what you get is corrosion and wear resistance, along with that deep, brass/bronze look that retains its golden luster over time. Give it a shot--this is a drop-dead gorgeous plating that will retain its deep, rich look for the generations to come.